CLAMPS AND CLAMPING ELEMENTS

Products Details

UNIVERSAL STRAP CLAMP

'TOOLFAST' Universal Strap Clamp is most suitable for die clamping on power presses and a very useful clamp for job clamping on 'T' slot table of Drilling, Milling, Shaping, Boring and other machine tools.

MOULD CLAMP

'TOOLFAST' Mould Clamp is designed specially for low height applications only such as clamping of moulds on plastic injection.

moulding machines & pressure die casting machines.

MOULD CLAMP - FORGED

The Popular 'TOOLFAST' mould clamp is now available in forged steel body for exira strength. All models shown below are similar to the MC models on the previous page.

TAPPED END CLAMP

'TOOLFAST' Tapped End Clamps are Straps having special threaded adjustable support at the rear which can be adjusted to required height.

FORGED STRAP CLAMP

This clamp is a forged version of above TIUC clamps available only for the most popular size M-16. Most suitable for mould clamping on Plastic Injection Moulding Machine.

MCST SERIES MOULD CLAMP

‘TOOLFAST' new MCST series clamp solves the problem where forward and backward sliding of clamps is required but there are no T - slots on the platen.

COMPACT MILLING CLAMP

TOOLFAST' compact milling clamp is the most multipurpose, quick and easy to use down-hold milling clamp.

CMC CHAIN CLAMP

Our well known CMC clamp now available as a CHAIN CLAMP for large cylindrical workpieces.

PINCH CLAMPS

TOOLFAST' Low Height Pinch Clamp is useful for job clamping where complete top surface of the job is to be machined in one setting and hence can be clamped only from side faces.

STOP FOR PINCH CLAMPS

Stop or stopper blocks in different sizes as shown in table below are available to suit all above models of low height pinch clamps (PC Series) and Heavy Duty Pinch Clamps (HDPC Series).

LOW HEIGHT PINCH CLAMP

This is a new version of low height pinch clamp (PC Series) having step to support the workpiece above the machine table for through milling and drilling.

MINI PINCH CLAMP

TOOLFAST' Mini Pinch Clamp is useful for clamping of thin plates form side faces. Body made of hardened alloy steel is in the form of a T-Nut which slides easily into the T-slot.

LEVELLING JACKS AND HEIGHT BLOCKS

TOOLFAST' Levelling Jack can be used as an adjustable support block for clamps and as a stopper or levelling block in fixtures or machines, as well as for levelling surface plates or other heavy duty work pieces.

SCREW JACK - SMALL

Steel body screw jacks with heat treated main screw

LEVELLING JACK - HEAVY DUTY

TOOLFAST' Levelling Jack-Heavy Duty-Flange Mounting is same as LJ-HD but with flanged base for mounting on machine bed for additional rigidity.

SCREW JACK - HEAVY DUTY

TOOLFAST’ Screw Jack-Heavy Duty is meant for heavy applications and with more height upto 660 mm. In this series of screw jacks the screw rotates while going up or down. Body is rigid, steel fabricated.

ADJUSTABLE SUPPORT PLATEST

TOOLFAST' Adjustable Support Plates are used as adjustable supports at the rear of the clamp. It comprises of a number of plates each 2mm thick hinged together.

STEP BLOCKS

TOOLFAST' Step Blocks are used as adjustable supporting Blocks at the rear of the damp while clamping the workpiece. Different heights can be achieved by using combination of two different sizes of Step Blocks.

THREADED SUPPORT

These have large resting base and hexagon at bottom for height adjustment.

STRAP CLAMP

The most popular sizes of strap clamps are now made in forged body with additional benefit of tapped end for threaded supports.

WEDM CLAMP

T- NUT

CLAMPING STUD FOR USE WITH T-NUTS

These Studs are meant to be used with T-nuts to be tightened on smaller threaded length B1 shown in figure below and longer threaded length B shown in figure below is to accommodate Clamp / Nut / Washer etc.

CLAMPING STUD

These Studs having longer threaded length of side B1 shown in figure below which enables use on threaded platens of moulding machines or threaded beds of presses for longer insertion in the tapped holes.

EXTRA LONG NUT

These nuts have longer life as they have more number of threads than ordinary nuts.

FLANGED NUT

These nuts have flanged face for larger face contact with the surface to be tightened on.

EXTENSION NUT

These nuts are used to couple the studs with studs or T- Bolts in order to increase their length.

PLAIN WASHER

C-WASHER

Knurled outside diameter for easy gripping while quick insertion or removal.

CLAMPING KIT - 58 PIECE

TOOLFAST' Clamping Kit - 58 piece is available in an attractive powder coated metallic rack which can be hanged on machines or a wall or kept on a table.

CLAMPING KIT - 34 PIECE

'TOOLFAST' Clamping Kit - 34 piece is an economical clamping kit housed in an elegant wooden box.

CMM CLAMPING KIT - 62 PIECE

TOOLFAST' CMM clamping kit is specially designed for 3D coordinate measuring machine and other inspection and gaging applications.

WEDGE CLAMPS

TOOLFAST' manufactures all models of wedge clamps with new improved design now in India as per international sizes and types.

HYDRAULIC PULL CYLINDER-HPNR

These pull cylinders can be mounted under the fixture plate to pull down clamping screws of fixture clamps instead of tightening by spanner.

MINIATURE WEDGE CLAMP

This is a miniature version of wedge clamp for low height work pieces which need low clamping force. Clamping method is same as wedge clamp, just a tapped hole required on the fixture plate with stops.

SIDE CLAMP - WEDGE TYPE

This version of wedge clamp enables wedge clamping on one side only for clamping one workpiece on a fixture or directly on a machine table. Models for machine clamping come with a suitable T-Nut.

SIDE CLAMP - WEDGE TYPE - HEAVY DUTY

This is a heavy duty version of side clamp with M-16 clamping screw. Can be mounted directly on machine table or fixture plate

MULTIPLE WORKPIECE CLAMPS

If your workpiece is suitable for clamping with 'TOOLFAST' Wedge clamps, our team can design andmanufacture a multiple clamping fixture for you as the one shown in the picture.

MULTIPLE CLAMPING VICE

TOOLFAST offers a standard 60mm jaw width vice which is capable of clamping multiple workpieces.

STRAP CLAMP-FORGED BODY